Getting To Know Your Coffee Maker; Before Using For The First Time - Williams-Sonoma SIGNATURE Série Manuel D'utilisateur

GETTING TO KNOW YOUR COFFEE MAKER

PARTS DEFINED
Product may vary slightly from illustration
FIGURE 1
HANDLE
CAPSULE HOLDER
SMALL CUP
COFFEE BUTTON
(WITH INDICATOR)
LARGE CUP
COFFEE BUTTON
(WITH INDICATOR)
CAPSULE
COLLECTION TRAY
DRIP TRAY COVER
DRIP TRAY

BEFORE USING FOR THE FIRST TIME

Remove the water tank from the machine, pull the red silicone plug by the tab to remove and discard.
Remove the warning sticker from the water tank. Fill the water tank with drinkable water. Do not exceed
the MAX line.
With the lid on the water tank place the water tank straight onto the base.
You will see water bubbles flowing upwards, this is a sign that the water tank has been inserted
correctly.
Turn the unit on by flipping the side button. Do not insert capsule.
Place a cup on the drip tray. When both lights are illumined solid, press the double cup button. Within a
few seconds water will begin to dispense.
If indicator lights blink rapidly and no water is dispensed, turn unit off, wait 2 minutes, and repeat steps
2 through 4.
While pressing down the large cup or small cup coffee buttons, the machine may produce a pumping
NOTE:
sound, which means the water is starting to brew the coffee.
SO-316393_15397, 15398_WS CapsuleCM_IMr9.indd 3
WATER TANK LID
WATER TANK
COFFEE OUTLET
POWER SWITCH
3
2019-10-11 3:03 PM