Publicité
Les langues disponibles
Les langues disponibles
Quality quartz clock movement
"counter clockwise model"
Item no. 67 23 93
1.
Intended use
The product is intended for working with clock arms (not included) to provide time information in an anti-clockwise
direction. The product is powered by one AA battery (not included). It is only authorised to be used in dry indoor
environment.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them.
Make this product available to third parties only together with its operating instructions.
2.
Delivery content
•
Quartz clock movement
•
Hanger
•
Central fixing nut
•
Hand nut
3.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
Persons / Product
•
The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. These may become dangerous playing material
for children.
•
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, vapours and solvents.
•
Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
-
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
•
Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the
product.
Battery
•
Correct polarity must be observed while inserting the battery.
•
The battery should be removed from the device if it is not used for a long period of time to avoid damage
through leaking. Leaking or damaged batteries might cause acid burns when in contact with skin, therefore
use suitable protective gloves to handle corrupted batteries.
•
Batteries must be kept out of reach of children. Do not leave the battery lying around, as there is risk, that
children or pets swallow it.
•
Batteries must not be dismantled, short-circuited or thrown into fire. Never recharge non-rechargeable
batteries. There is a risk of explosion!
Miscellaneous
•
Consult an expert when in doubt about operation, safety or connection of the device.
•
Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified shop.
•
If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
4.
Assembly
11
10
8 7
9
Assemble the parts in the following the order:
1.
Quartz clock movement
2.
Hanger
3.
Big rubber washer
4.
Dial and base of the case (not included)
5.
Big rubber washer
6.
Central fixing nut
7.
Hour hand (not included)
8.
Minute hand (not included)
9.
Hand nut
10.
Second hand (not included)
11.
Cover of the case (not included)
•
2 x big rubber washer
•
Operating instructions
3 2
6
4
5
5.
Battery insertion / replacement
Insert an AA battery while observing the correct polarity.
Version 05/11
6.
Operation
1.
Set the time with the black turning knob at the back of the clock movement.
2.
Hang the clock at your desired location in an upright position.
3.
The clock is now moving in an anti-clockwise direction and shows the time.
4.
When the clock stops running or time deviation is observed, replace the battery.
7.
Disposal
General
In order to preserve, protect and improve the quality of environment, protect human health and
utilise natural resources prudently and rationally, the user should return unserviceable product to
relevant facilities in accordance with statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed separately and not as
municipal waste.
Batteries / rechargeable batteries
The user is legally obliged (battery regulation) to return used batteries and rechargeable batteries.
Disposing used batteries in the household waste is prohibited! Batteries/ rechargeable
batteries containing hazardous substances are marked with the crossed-out wheeled bin. The
symbol indicates that the product is forbidden to be disposed via the domestic refuse. The
chemical symbols for the respective hazardous substances are Cd = Cadmium, Hg = Mercury,
Pb = Lead.
You can return used batteries/ rechargeable batteries free of charge to any collecting point of your
local authority, our stores or where batteries/ rechargeable batteries are sold.
Consequently you comply with your legal obligations and contribute to environmental protection!
8.
Technical data
Operating voltage:
Central fix nut depth:
Dimensions (W x H x D):
Weight:
Hands – requirements:
Hands
Recommended length:
Recommended weight:
Typical torque:
Bushing thickness:
1
© 2011 by Conrad Electronic SE.
1.5 V/DC, 1 x AA battery (not included)
10 mm
57 x 56 x 16 mm (movement only)
25 g (movement only)
Second
Minute
max 120 mm
max 125 mm
max. 0.9 g
max. 8 g
5 g/mm
min. 150 g/mm
0.8 (+0/ -0.01) mm
3.5 (+0/ -0.02) mm
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
All rights including translation reserved. Reproduction by any method, e.g.
photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited.
The operating instructions reflect the current technical specifications at time of print.
We reserve the right to change the technical or physical specifications.
Hour
-
max. 8 g
min. 300 g/mm
5 (+0.05/ -0) mm
V2_0511_02-HL
Publicité
