oneConcept 10029373 Mode D'emploi page 40

Tighten rain gauge transmitter to your mounting pole or bracket with two U-bolts and four
M5 nuts, or fix on the wall with four tapping screw, as shown:
Thermo-Hygrometer Transmitter Installation
It is recommended you mount the Thermo-hygrometer sensor outside
in a shaded area. A north facing wall is preferred because it is in the
shade most of the day. Direct sunlight and radiant heat sources will re-
sult in inaccurate temperature readings. Although the sensor is water
resistant, it is best to mount in a well protected area, such as under an
eve. Use a screw or nail (not included) to affix the remote sensor to the
wall, as shown (rigt picture).
Display Features
• The comfort icon is based on humidity ranges specified below. The icon is displayed for
indoor humidity, remote channel 1 humidity and optional remote channels 2 through 8
humidity.
RH < 45 %
Dry
40
RH 45 % - 65 %
Comfortable
RH > 65 %
Wet