Description Of Controls; Switching The Appliance On And Off - Blanco BC GF 3500 Manuel D'utilisation Et D'installation

The panel carries the controls for the following func-
tions.
A)Cooking start and stop (ON/OFF) button: for
starting or stopping the cooking program.
– With circuit board OFF: press once to switch on
the circuit board.
– With circuit board in standby mode or with heat-
ing in progress: hold down for +/- 6 seconds to
switch off the circuit board.
B)Temperature setting button: decreases the
temperature (during programming and use).
C)Temperature setting button: increases the
temperature (during programming and use).
D)Power button: per selects one of the three
power settings.
– With circuit board on or with heating in progress:
press once to select one of the three power levels
available.
E)Display: consists of 7 icons and 4 Digits:
e1) CELSIUS icon: on when the temperature
is displayed in degrees Celsius.
e2) FAHRENHEIT icon: on when the temper-
ature is displayed in degrees Fahrenheit.
e3) THERMOMETER icon: on if heating is in
progress.
e4) HEATING ELEMENT icon: three icons control-
IT IT
led separately depending on the power selected us-
ing button (D).
e5) ON/OFF icon: illuminates to indicate that the
GB GB
appliance is powered up.
DE DE
FR FR
ES
ES
Switching on
1 - Turn off the appliance's circuit breaker to
disconnect it from the electrical mains.
Icon (e5) illuminates.
2 - Press button (A) to set the circuit board in
standby mode.
Icon (e5) goes out and icons (e4) illuminate; 4 red
dashes will appear on the display (e6).
3 - Press button (A) again to
appliance and start the cooking cycle.
The temperature will appear in red on the display (e6).
English

DESCRIPTION OF CONTROLS

SWITCHING THE APPLIANCE ON AND OFF

switch on the
e6) Group of DIGITS:
– With circuit board OFF: OFF.
– With circuit board in standby: shows 4 red
dashes
– With circuit board in setting mode: shows the
temperature setpoint in green.
– With heating
temperature in red.
Switching off
1 - Hold button (A) down for ±6 seconds to switch
the appliance off.
Icon (e5) illuminates.
Important
The appliance is still powered up.
2 - Turn off the appliance's circuit breaker to
disconnect it from the electrical mains.
- 8 -
in progress: displays the