Samsung DVE G 52M775 Série Manuel D'utilisation page 44

Troubleshooting
Code
3C
HC
HC4
9C1
tC
tC5
dF
If any information code keeps appearing on the screen, contact a local Samsung service
center.
44 English
DV7750M-03170Y-00_EN.indd 44
Action
Malfunction is detected in the motor relay circuit.
• Contact a Samsung customer service center.
High temperature heating check
• Clean the lint filter.
• If this information code remains, contact a Samsung customer
service center.(enter the line test mode)
The electronic control needs to be checked.
• Check if power is supplied properly.
• If the information code remains, contact a customer service
center.
The Thermistor1 resistance is very low or high.
• Check for a clogged lint screen
• Check if the vent system is restricted.
• If this information code remains, contact a Samsung customer
service center.
The Thermistor2 resistance is very low or high.
• Check for a clogged lint screen.
• Check if the vent system is restricted.
• If this information code remains, contact a Samsung customer
service center.
Incorrect door switch.
• Contact a Samsung customer service center.
2016-12-28 11:43:24