Tips For Use; Cleaning And Care - OK. OMX 102 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
Size - A5

TIPS FOR USE

• To achieve the best results for pureeing solid ingredients, only insert these into the
blender in small portions rather than filling a large amount at once.
• If you are working with solid ingredients, cut these into small pieces (2-3 cm).
• Start with a small amount of liquid when blending liquid ingredients. Then gradually
add more liquid through the lid opening section.
• You can stabilise the product correctly if you place your hand on top of the locked
blender.
• It may be useful to use the pulse mode when blending any solid or very thick food
products, as this will prevent the cutting blade from becoming clogged.

CLEANING AND CARE

Always clean the jar after each operation, first fill the jar half with warm water and
operate at the pulse setting for several times.
1. Set the switch to position "0", unplug the power cable from the wall socket.
2. Clean the blender with a long-handled cleaning brush so that you do not injure
yourself on the cutting blade. Warning! The cutting blade is very sharp.
3. Warning! Never immerse any electrical parts of the product in water or in other
liquids during cleaning. Never place it under running water.
4. When cleaning, never use petrol or solvents, and do not use any abrasive cleaners
or cleaning aids.
SPECIFICATION
Rated voltage: 220–240 V~, 50 Hz / Rated power input: 350-400 W / Continuous
Operation time: 1 minute
DISPOSAL
Do not dispose of this appliance as unsorted municipal waste. Return it to a
designated collection point for the recycling of WEEE. By doing so, you will
help to conserve resources and protect the environment. Contact your retailer
or local authorities for more information.
OMX102_A5_130328.indb 20
20
28/3/13 4:14 PM

Publicité

Table des Matières
loading

Table des Matières