OK. OMX 102 Mode D'emploi page 16

Size - A5
• Avoid damages to the power cord that may be caused by kinks or contact with
sharp corners.
• Keep this product including power cord and power plug away from all heat
sources like for example, ovens, hot plates and other heat-producing products/
objects.
• Only unplug from the power socket by the plug itself. Do not pull on the cord.
• Unplug the product ...
- when the product is not being used,
- in case of malfunctions,
- before attaching / detaching accessories and
- before cleaning the product.
• If the power cord or the casing of the product is damaged or if the product is
dropped, the product may not be used before it is examined by an authorised
service agent.
• Use this product in dry indoor areas only and never outdoors.
• Place the product on a flat, sturdy and slip-resistant surface.
• Protect this product from extreme heat and cold as well as from direct sunlight
and dust.
• Warning! Do not use this product near water or heavy moisture; e.g. in a damp
basement or beside a swimming pool or bathtub.
• This product is not suitable for commercial use. It is designed for household use
only.
• The product is not suitable for continuous operation. Do not use the product at
a time longer than 1 minute. Let it cool down before next use.
• Caution! Ensure that the product is switched off before removing it from the
stand.
• Switch off the product and disconnect from supply before changing
accessories or approaching parts that move in use.
• Never pour boiling liquids or very hot food products into the blender! Allow
them to cool down to a lukewarm temperature.
• Never operate the product when it is empty.
• Do not hold on to the inside of the blender during operation. The blades are
extremely sharp!
• Do not open the lid when the product is in operation. Otherwise food products
may fly off at high speed!
• Never insert any cutlery or stirring objects into the blender while the product is
in operation. There will be a considerable risk of injury if you touch any very fast
rotating blades!
• Do not allow the product to operate unsupervised.
• Make sure that the motor unit and supply cord do not become wet.
• Care shall be taken when handling the sharp cutting blades, emptying the bowl
and during cleaning.
• Clean the product and all other accessories after each use.
• Follow the instructions in the chapter Cleaning and care.
OMX102_A5_130328.indb 16
16
28/3/13 4:14 PM