Ec Declaration Of Conformity; Definitions: Safety Guidelines; General Power Tool Safety Warnings - DeWalt DCF899 Mode D'emploi

Charger
Mains voltage V
AC
Battery type
Approx. charging time min 30 (1.3 Ah) 35 (1.5 Ah) 50 (2.0 Ah)
of battery packs
70 (3.0 Ah) 100 (4.0 Ah) 120 (5.0 Ah)
Weight kg
Charger
Mains voltage V
AC
Battery type
Approx. charging time min 22 (1.3 Ah) 22 (1.5 Ah) 30 (2.0 Ah)
of battery packs
45 (3.0 Ah) 60 (4.0 Ah) 75 (5.0 Ah)
Weight kg
Fuses
Europe 230 V tools
U.K. & Ireland 230 V tools

Definitions: Safety Guidelines

The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
DCB113
MACHINERY DIRECTIVE
230
10.8/14.4/18 Li-Ion
CORDLESS IMPACT WRENCH
0.4
DCF899, DCF899H
DCB115
D
under Technical Data are in compliance with:
230
2006/42/EC, EN60745-1:2009+A11:2010,
10.8/14.4/18 Li-Ion
EN60745-2-2:2010
These products also comply with Directive
2004/108/EC (until 19.04.2016), 2014/30/EU (from
0.5
20.04.2016) and 2011/65/EU. For more information,
please contact D
refer to the back of the manual.
The undersigned is responsible for compilation of
10 Amperes, mains
the technical file and makes this declaration on
3 Amperes, in plugs
behalf of D
Markus Rompel
Director Engineering
D
D-65510, Idstein, Germany
02.11.2015

General Power Tool Safety Warnings

The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) WORK AREA SAFETY
WALT declares that these products described
e
WALT at the following address or
e
WALT.
e
WALT, Richard-Klinger-Straße 11,
e
WARNING: To reduce the risk of injury,
read the instruction manual.
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
english
29