Assigning User Ids: Allowing Authorized Phone Recording Only; Assigning A Work Type Code To Dictations - Philips Desktop 9850/10 Manuel De Référence Rapide

Digital Telephone Desktop 9850

Assigning user IDs: allowing authorized phone recording only

1. Connect the Desktop 9850 with the USB cable to the PC and establish the connection by
pressing the DOWNLOAD button (
2. Start the software program, go to the DPM menu and select DPM Wizard.
3. On the Keyword Definition page define all required user IDs. Keyword 1: usage = Author,
content = IDs for every authorized user (minimum one digit, maximum four).
4. Continue through the wizard; when you click Finish the IDs are transferred to the device.
Note: Up to 20 different user
IDs can be assigned to one
Desktop 9850.
Example: In this example some
user IDs include a + character
after the ID (1010+. 2010+,
3010+). This indicates their
advanced user rights which
means full remote functions will
be available to them.
Note: For details on the working
with the telephone keys, refer to
'Using the telephone keypad'
above.

Assigning a work type code to dictations

It is possible to assign a work type code after entering your user ID (Keyword 1).
This code is stored in each dictation header file (Keyword 2) allowing additional dictation sorting
and filtering when transcription takes place.
Note: Up to two digits can be assigned as the work type code by the calling author: 1 to 99.
If no Keyword 1 is assigned, only the worktype code will be asked for. As a precondition the
"usage" (top line in) Keyword 2 needs to be defined - type in for example: "Worktype".
).
17