Invisible Wall - Hoover BH70600 Série Mode D'emploi

Invisible Wall*

The invisible wall creates a barrier that ensures your Quest
Open the battery
compartment cover. Insert
the 2 supplied batteries
(type C, 1.5 V) as indicated.
13
is confined to the rooms you want cleaned.
TM
To set up invisible wall,
power the invisible wall on
and set it at the room entry
way or area you do not
want Quest to pass. Ensure
™
the Hoover logo is facing
AWAY from where you want
your barrier. The LED on the
wall station blinks to indicate
the invisible barrier is active.
1.5 Ft
Position the Invisible
wall station at 45° to the
entrance of the room to
create a straight line barrier
parallel to the room.
NOTE:
Ensure that there are
no reflective surfaces around the
invisible wall.
CAUTION
!
When charging batteries, be sure not mix
batteries with different types or those that
are partly charged.
*
Accessories vary per model. Accessories not
included with your model may be purchased
separately by visiting Hoover.com
!