Installing Flow Switch - Davey EcoMatic COMM500 Instructions D'installation Et D'utilisation

FLOW SWITCH INSTALLATION – SCMAX
FLOW SWITCH INSTALLATION – SCMAX
Locate a suitable position to install the flow switch. The flow switch should be installed on a straight section of pipe

Installing flow switch

with a minimum of 5 pipe diameters, in either direction, between the flow switch and any pumps, valves, or fittings.
Locate a suitable position to install the flow switch. The flow switch should be installed on a straigh
This will ensure that the paddle is exposed to non-turbulent flow and giving a steady and stable response.
Locate a suitable position to install the flow switch. The flow switch should be installed on a straight section
with a minimum of 5 pipe diameters, in either direction, between the flow switch and any pumps, v
of pipe with a minimum of 5 pipe diameters, in either direction, between the flow switch and any pumps,
This will ensure that the paddle is exposed to non-turbulent flow and giving a steady and stable res
valves, or fittings. This will ensure that the paddle is exposed to non-turbulent flow and giving a steady and
stable response.
5 x pipe dia.
minimum.
The flow switch can be installed in vertical or horizontal pipes, either on the side or on the top of the pipe.
The flow switch can be installed in vertical or horizontal pipes, either on the side or on the top of the pipe.
The flow switch can be installed in vertical or horizontal pipes, either on the side or on the top of th
The flow switch should not be mounted on the underside of horizontal pipes. The flow switch should not be mounted on the underside of horizontal pipes.
The flow switch should not be mounted on the underside of horizontal pipes.
This will ensure that the paddle is exposed to non-turbulent flow and giving a steady
5 x pipe dia.
minimum.
5 x pipe dia.
minimum.
5 x pipe dia.
minimum.
The flow switch can be installed in vertical or horizontal pipes, either on the side or o
The flow switch should not be mounted on the underside of horizontal pipes.
5 x pipe dia.
minimum.
5 x pipe dia.
minimum.
10