deville C07728 Notice D'emploi page 17

•
Clean regularly the secondary air intake part (Fig. 8).
- Vacuum dust and the particles stuck between the air guide and the window glass. If necessary slip a
thin blade or a sheet of rigid cardboard
(clearing of the particles).
These particles block the making of the secondary air flow which protects the widow from the direct contact
with smokes and complete the the burning of the wood.
- Scrape off with the end of a metallic object
which has settled there.
These operations have to be made as soon as the window glass is dirty and it is essential to wait for the
complete extinction of the fire within the appliance to implement them.
If some local and distinct soot patches (Fig. 8) appear again and multiply, it is necessary to dismount the air
guide to make a more complete cleaning (Fig. 9) :
. Hang the door out and lay it down.
. Remove the 3 screws.
. Remove the air guide A and clean it.
. Reassemble the whole and check that the original window kit is respected.
This operation has to be performed by a skilled professional.
•
Check the efficiency of the door latch and, if required, make the following adjustments (Fig. 10) :
To harden door closure :
-
Successively loosen screw
.
. Turn both screws ¼ turn and repeat the operation as required.
NOTE : This operation increases pressure on the hearth door's sealing gasket.
To soften door closure :
-
Successively loosen screw
.
. Turn both screws ¼ turn and repeat the operation as required.
NOTE : This operation reduces pressure on the hearth door's sealing gasket.
between the air guide and the glass to make the cleaning easier
the inferior edge of the air intake part to remove the bistre
and tighten screw .
and tighten screw .
17