Clean The Machine; Protecting The Environment; Storing The Machine - Ego Power+ BC3800E Manuel De L'opérateur

CLEAN THE MACHINE

◾
After each use of 3-teeth blade / trimmer head, clean
the debris, clogged soils or grass on the blade and
guard with a soft brush.
NOTICE:
When the line-cutting blade becomes dull,
please sharpen it performed by a qualified service
technician or replace with a new line-cutting blade as
necessary.
◾
After each use of brush cutter, clean the cutting unit
using a damp cloth with a mild detergent.
◾
Do not use any strong detergents on the plastic
housing or the handle. They can be damaged by certain
aromatic oils, such as pine and lemon, and by solvents
such as kerosene. Moisture can also cause a shock
hazard. Wipe off any moisture with a soft dry cloth.
◾
Use a small brush or a small vacuum cleaner to clean
the air vents on the rear housing.

STORING THE MACHINE

◾
Remove the battery pack from the tool.
◾
Wear heavy gloves to clean the tool thoroughly.
◾
Mount the blade sheath onto the 3-teeth blade for safe
saving (Fig. Y).
◾
Store the unit in a dry, well-ventilated area, locked-up
or up high, out of the reach of children. Do not store
the machine on or adjacent to fertilizers, gasoline, or
other chemicals.
56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BC3800E

Protecting the environment

Do not dispose of electrical equipment,
battery charger and batteries/
rechargeable batteries into household
waste!
According to the European law
2012/19/ EU, electrical and electronic
equipment that is no longer usable, and
according to the European law 2006/66/EC,
defective or used battery packs/batteries,
must be collected separately.
If electrical appliances are disposed of in
landfills or dumps, hazardous substances
can leak into the groundwater and get into
the food chain, damaging your health and
well-being.
EN
15