Table Des Matières; Installing Batteries - Excalibur electronics Aston Martib 1:10 М8 Vantage Manuel D'utilisation

C
ENGLISH
ongratulations on your purchase of Excalibur
Electronics' 1:10 Aston Martin. You and your
friends will enjoy hours of fun driving your
1:10 Aston Martin.
Your 1:10 Aston Martin is easy to use but be sure
to use it safely. Before starting, please read this manual
thoroughly, especially noting safety, care and battery
information. Keep this manual for reference.
This package contains the 1:10 Aston Martin, its
transmitter, its tube for one vehicle antenna,
and its manual.
2
The legendary King Arthur
brandished a magic sword,
Excalibur, from which we take
our company name. With this
unique weapon in his hands, he
could not be vanquished.
Although Excalibur Electronics
can't claim the magical secrets
of Merlin, King Arthur's court
wizard, sometimes our patented
technology may make it seem
as if we could.
We make you think.
T
ABLE OF
Installing Batteries. . . . . . . . . . . . . . . . . . . .page
Functions of Buttons . . . . . . . . . . . . . . . . . . . p age
Getting Started. . . . . . . . . . . . . . . . . . . . . . .page
Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page
Troubleshooting. . . . . . . . . . . . . . . . . . . . . page
Caution. . . . . . . . . . . . . . . . . . . . . . . . . . . page
Special Care & Handling . . . . . . . . . . . . . . page
Battery Information. . . . . . . . . . . . . . . . . . . page 10
FCC Warning. . . . . . . . . . . . . . . . . . . . . . . page 10
90-Day Limited Warranty. . . . . . . . . . . . . . .page 11

INSTALLING BATTERIES

To install batteries in the transmitter,
please follow the following steps:
1. Remove battery cover located at the
back.
2. Insert 1 x 9V battery following the +/-
marking.
3. Replace battery cover.
To install the power pack in your 1:10
Aston Martin, please follow the following steps:
1. Open the power pack cover located at the underside by turn-
ing the lock and lifting the cover off.
2. Attach the pack connector plug into the compartment plug
receptacle and secure tightly.
3. Place the battery pack into position then close and lock the
cover.
4. When removing the battery pack, carefully lift so you don't
pull on the wires.
(Also see Battery
Information
on page 8.)
3
ENGLISH
C
ONTENTS
3
5
6
6
7
8
9