Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cleaning
Toothbrush handle
Brush head
4 Make sure the sanitizer is plugged into a live
outlet of appropriate voltage.
5 Close the door and press the green power
on/off button once to select the UV clean cycle.
Note: You can only turn on the sanitizer if the
door is properly closed.
Note: The sanitizer stops if you open the door
during the sanitizing cycle.
Note: The sanitizer cycle runs for 10 minutes
and then automatically shuts off.
-
The sanitizer is in operation when the light
glows through the window.
Warning: Do not clean the brush head,
handle, travel charger or the UV sanitizer in
the dishwasher.
1 Remove the brush head and rinse the metal
shaft area with warm water. Make sure you
remove any residual toothpaste.
Caution: Do not push on the rubber seal on the
metal shaft with sharp objects, as this may cause
damage.
2 Wipe the entire surface of the handle with a
damp cloth.
1 Rinse the brush head and bristles after each use.
2 Remove the brush head from the handle and
rinse the brush head connection with warm
water at least once a week.
19
English
Publicité
Table des Matières
