Jumpers; Jslow1: Slow Mode Booting Jumper - MSI X99A SLI Krait Edition Série Mode D'emploi

Jumpers

JBAT1: Clear CMOS Jumper
There is CMOS RAM onboard that is external powered from a battery located on the
motherboard to save system configuration data. With the CMOS RAM, the system can
automatically boot into the operating system (OS) every time it is turned on. If you
want to clear the system configuration, set the jumpers to clear the CMOS RAM.
Important
You can clear the CMOS RAM by shorting this jumper while the system is off.
Afterwards, open the jumper. Do not clear the CMOS RAM while the system is on
because it will damage the motherboard.

JSLOW1: Slow Mode Booting Jumper

This jumper is used for LN2 cooling solution, that provides the extreme overclocking
conditions, to boot at a stable processor frequency and to prevent the system from
crashing.
Important
• Users will try extreme low temperature overclocking at their own risks. The
overclocking results will vary according to the CPU version.
• Please don't set this jumper to "Enabled" when power-off or the system will be un-
bootable.
1
Keep Data Clear Data
Normal Enabled
(Default)
(Please enable this
jumper during BIOS
POST.)
En-30
1