Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Jumpers
Clear CMOS Jumper: JBAT1
There is a CMOS RAM onboard that has a power supply from an external battery to
keep the data of system configuration. W ith the CMOS RAM, the system can auto-
matically boot OS every time it is turned on. If you want to clear the system configuration,
set the jumper to clear data.
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return
to 1-2 pin position. Avoid clearing the CMOS while the system is on; it will
damage the mainboard.
Hardware Overclock FSB Jumpers: JFSB1/ JFSB2
You can overclock the FSB to increase the processor frequency by changing the
jumpers JFSB1 and JFSB2. Follow the instructions below to set the FSB.
1
200 MHz
(Default)
Important
1. Make sure that you power off the system before changing the jumpers.
2. Please default OC jumper if you need to support FSB400 CPU.
1
JBAT1
1
Keep Data
1
3
3
1
266 MHz
3
1
3
Clear Data
JFSB1
JFSB2
3
1
333 MHz
3
En-21
Publicité
Table des Matières
