Lanaform Lumi Lamp Manuel D'instructions page 8

Normative references
EN
Guidance and manufacture's declaration – electromagnetic emissions – for all EQUIPMENT and SYSTEMS
The model Lumi Lamp LA190109 is intended for use in the electromagnetic environment specified below.
The customer or the user of the model LUMI LAMP LA190109 should ensure that it is used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
The model LUMI LAMP LA190109 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of
the model LUMI LAMP LA190109 can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the model LUMI LAMP LA190109 as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output power
of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be estimated using the equation applicable
to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
Version 01 Lot001 - 24/06/2015
Guidance and manufacturer's declaration – electromagnetic emissions
Compliance
Group 1
Class B
Class C
Complies
Recommended separation distances between portable and mobile
RF communications equipment and the EQUIPMENT or SYSTEM –
for ME EQUIPMENT or ME SYSTEM that are not LIFE-SUPPORTING
Recommended separation distances between
portable and mobile RF communications equipment and the model LUMI LAMP LA190109 Equipment.
150 kHz to 80 MHz
d = 1.167
0.117
0.369
1.167
3.690
11.67
Separation distance according to frequency of transmitter
m
80 MHz to 800 MHz
d = 1.167
0.117
0.369
1.167
3.690
11.67
Electromagnetic environment – guidance
The LUMI LAMP LA190109 uses RF energy only for its
internal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in
nearby electronic equipment.
The model LUMI LAMP LA190109 is suitable for use in
all establishments, including domestic establishments
and those directly connected to the public low-voltage
power supply network that supplies buildings used for
domestic purposes.
800 MHz to 2,5 GHz
d = 2.333
0.233
0.738
2.333
7.377
23.33
Lumi Lamp
8