Installing The Cover - cosi Cosivista Mode D'emploi Et D'installation

- Make sure the Cosivista, ceramic logs and lava rocks are completely cooled down.
- Make sure the Cosivista is no longer connected to the gas bottle.
- On the control panel you will find a smaller black button besides the control button. This is the ignition
where you will find the battery.
- You can now twist the black ignition open and place the battery on the ignition, according to the
instructions. Please mind the +/- sides.
- The old battery should be returned to a collection point.
6. Moving the unit
It is advisable to move the Cosivista as little as possible. With every move you risk damage to the Cosivista. If
you still want to move the unit, make sure that the Cosivista is shut off from the gas bottle. The new location
for Cosivista needs to be clean, flat and hardened again.

8. Installing the cover

For each Cosivista an all-weather cover can be purchased separately. The
protection cover protects your Cosivista against weather influences. Only
place the cover when the Cosivista is completely cooled down. If you place
the cover immediately after usage of the device, the cover will gain damage
and possibly even catch fire.
7. Placing the back panel into the Cosivista
The included back panel can easily be placed inside the back of the
Cosivista. Take the panel with both hands and keep the side with the U
profile facing upwards. Place the panel with both hands into the recess on
the top of the Cosivista (see picture on the left).
With the Cosivista 160 it is also possible to place the back wall halfway up
the fire pit, so that it does not cover the glass but the underside at the back.
See image on the bottom right.
WARNING: Only install or remove the back panel when the Cosivista is not
in use and is cooled down. The back panel may become very hot during use.
14