auna Wallie Mode D'emploi page 41

BT
The unit has a BT function that can receive a signal within 8 metres.
Pairing the unit with a BT device to listen to music:
1. Press the STANDBY button (2) on the main unit or (1) on the remote
control.
2. Press FUNCTION button (4) on the main unit or the MODE button (7) on
the remote control to turn on the BT mode.
3. If the unit is not paired with any BT device, the display will flash "BT."
4. Activate your BT device and select the search mode.
5. "MC120" will appear on your BT device list.
6. Select "MC120" and enter "0000" for the password if necessary.
7. To disconnect the BT function, press the FUNCTION button (4) on the
main unit or the MODE button (7) on the remote control to switch to
another mode or disconnect the function from your BT device.
Notes on using BT:
• If the signal strength is weak, your BT receiver may disconnect, but it
will re-enter pairing mode automatically.
• For a better signal reception, remove the obstacles between the unit
and the BT device.
• This unit supports A2DP (Advanced Audio Distribution Profile) and
AVRCP (Audio Video Remote Control Profile) functions. This can only be
paired with one BT device at one time.
• Compatibility with all devices and media types is not guaranteed.
• Some mobile phones with the BT function may connect and disconnect
as you make and end calls. This is not an indication of a problem with
your unit.
EN
41