Landxcape LX835 Guide D'installation page 8

Installation
8
1. Place the charging station
Find a flat surface for the charging station, the place should be dry and
away from direct sun light. And the adapter can be mounted on the wall.
Landxcape 's charging station can be placed against the wall or fence,
TM
with the charging components facing your lawn. If possible, place the
charging station in the shade, and it is better to charge the battery in
a cool place. When laying the boundary wire, leave at least 150cm of
straight wire with no obstacles on each side of the charging station. Make
sure the adapter and electrical outlet are always kept in a dry place.
Insert charging pile into charging base.Fix the charging station to the
ground by tightening the supplied base fixing nails with the supplied hex
key.
NOTE: Boundary wire on each side of the charging station
should be straight for 150cm without corners or obstacles to
ensure proper docking.
The charging station must be positioned on relatively level ground. It must
not be positioned on an inclined surface or anywhere that makes its plate
bend.
EN