Atlantic Fil Pilote Notice D'installation Et D'utilisation page 14

7/ After programming the card (see Page 17), refit the cover or the
cover and programming card assembly, depending on the model.
In the case of installation without an energy controller:
In the case of installation with an energy controller:
Please refer to the controller's manual.
This product allows you to choose Comfort or Eco as the default
mode.This is the mode to which the box returns after a time per-
iod only if there is no programming card.
Every time you switch on, the upper display shows "Mod" and the
indicator light for the memorised default mode flashes rapidly. For
ten seconds, you can alter the mode by pressing the mode change
key.After ten seconds, the current mode is automatically recorded
as the new default mode and "Mod" is no longer displayed. When
you first switch on, Comfort is set as the initial default mode.
In normal operation, a mode change instruction can take
30 seconds to be applied to the heating appliances in the
zone.
III/ Wiring diagram
Pilot wire Zone 1
NEUTRAL
PHASE
IV/ Commissioning
13
Pilot wire Zone 2