Atlantic Fil Pilote Notice D'installation Et D'utilisation page 12

The installation must be made in accordance with normal trade
practice and comply with the standards in force in the country of
installation (NFC 15100 for France).
v
I/ T echnical characteristics
-
Wall mounted in a standard recessed box: dia. 60mm/ depth =
40mm.
-
Dimensions: 143x80x28mm (installed).
-
Protection class: IP20.
-
Power supply: single-phase 230V/ 50Hz mains supply.
-
Operating temperature: 0°C +40°C.
-
Cabling: 1.5mm2 section without spurring.
-
Pilot wire: depending on the model, one or two 6-order pilot
wire outputs as per GIFAM standard; each capable of piloting a
maximum of 15 heating appliances.
Work with the power switched off when making
connections.
So that the temperature displayed represents the actual ambient
temperature, avoid installing the wall box on a cold wall or in a
draught.
1/ Remove the cover (wall box model only) or the cover and pro-
gramming card assembly (1 or 2-zone kit model).
2/ Completely unscrew the crosshead screw situated under the
wall box.
I
NSTALLATION
II/ Fitting instructions
11