Lindy BNX-100 Mode D'emploi page 3

Overview
1
3
2
4
Left
1. Noise Cancelling On/Off Switch
2. Activate Audio Pass-Through mode
3. Battery meter & ANC indicator
4. USB charging port
Turn wireless on/off
Enter pairing mode
Wireless
Clear pairings
Play/Pause music
Music Playback Next/Previous song
Adjust volume
Answer a call
End a call
Call Related
Ignore a call
Last dialled number redial
Right
5. Volume Up / Next Track (Wireless only)
6. Wireless Indicator LED
7. Multi-Function Button (On/Off, Pairing,
Answer/End/Reject Call (Wireless only)
8. Volume Down / Previous Track (Wireless only)
9. 3.5mm Audio Jack
10. Microphone
Press and hold the Multi-Function Button (7) for 3 seconds.
From off press and hold the Multi-Function Button (7) for 5
seconds. The Wireless Indicator LED (6) will flash red/blue.
From off press and hold the Multi-Function Button (7) until the
Wireless Indicator LED (6) flashes purple.
Press down the Multi-Function Button (7) once to start playing
music and press it again to pause your music.
Short press the Volume Up/Next button (5) to play the next
track. To play the previous track, short press the Volume Down/
Previous button (8).
Long press the Volume Up/Next button (5) to increase the
volume. To reduce the volume, long press the Volume Down/
Previous button (8).
Press the Multi-Function Button (7) once to answer.
Press the Multi-Function Button (7) again to end.
Double press the Multi-Function Button (7).
Press the Multi-Function Button twice in standby status.
5
6
7
8
9
10
3