Team Orion Advantage One 405 Mode D'emploi page 12

LiPo Charging procedure
 Connect the battery to the charger using the charge
lead.
 Connect the battery balancing connector to the
correct balance port on the charger.
 Verify that the LIPO CHARGE LED flashes green.
 Select the charge current 1, 2, 3 or 4A, using the +
and – keys.
 Press the LIPO START key to start the charge, the
LIPO CHARGE LED lights solid red.
 Once the charge is completed, the LIPO CHARGE
LED lights solid green.
 Disconnect the battery.
YOU CAN STOP THE CHARGE PROCESS AT ANY
TIME BY PRESSING THE LIPO START KEY.
12 - English
NiMH/NiCd batteries
NiMH/NiCd batteries require only one connection to the
charger.
NIMH AND NICD BATTERIES ARE BOTH CHARGED
USING THE NIMH MODE.
WHEN A BATTERY IS CONNECTED TO THE
CHARGE LEAD AND NO BALANCE CONNECTOR
IS PRESENT, NIMH CHARGE MODE IS ACTIVATED
AND THE NIMH CHARGE LED FLASHES GREEN.
NiMH/NiCd Charging procedure
 Connect the battery to the charger using the charge
lead
 Verify that the NIMH CHARGE LED flashes green
 Select the charge current, 1, 2, 3 or 4A, using the +
and – keys.
 Press the NIMH START key to start the charge, the
NIMH CHARGE LED lights solid red.
 Once the charge is completed, the NIMH CHARGE
LED lights solid green.
 Disconnect the battery when the charge is completed
YOU CAN STOP THE CHARGE PROCESS AT ANY
TIME BY PRESSING THE NIMH START KEY.
Team Orion Advantage ONE 405