Power Supply; Charging Batteries - Team Orion Advantage One 405 Mode D'emploi

POWER SUPPLY

WARNING! Never connect the charger simulta-
a
neously to an AC and DC power source. Use only
a compatible and reliable power source. Never
connect the charger to AC power with the DC power
cord still connected to the charger. Do not leave
the charger without supervision while it is powered
on. Always disconnect the charger from the power
source when not in use. Power supply issues can
cause the charger to malfunction and cause fire,
damage to the product, to personal property and
cause serious injury.
The charger can be powered from an AC power source
such as mains power outlet or a DC power source such as
a car battery. Only use one type of power source at a time.
AC power source: connect the AC power cord plug into a
100-240VAC power source such as a mains power outlet.
Only connect to an outlet which is compatible with the
power cord plug type.
DC power source: plug the DC power cord into the DC
power connector located at the back of the charger.
Connect the crocodile clips to a 11-15VDC/6A min. power
source. Respect polarities, red is positive + and black is
negative -. Make sure that the connection is reliable.
10 - English

CHARGING BATTERIES

WARNING! Always use charge settings which
a
are compatible with the battery. Always use only
compatible connectors. Always monitor the charging
process. Always disconnect the battery from the
charger once the charge is finished. Always end
the charging process if the battery becomes hot to
the touch or starts to change form (swell) during
the charge process. Failure to carefully setup the
charger and monitor the charge process can result
in fire, property damage or injury!
Battery connector : one charge lead with one battery
connector type is supplied with the charger (Deans or
EC3, depending on the version). If your battery uses a
different type of connector, you will have to purchase a
compatible charge lead or adapter separately.
Adapter : a Deans to Tamiya adapter is also included
with certain versions of the charger. This allows you to
charge batteries equipped with Tamiya connectors by
connecting the adapter between the battery and charge
lead.
Safety timer : The charger features a 120 minutes safety
timer. This means that after 120 minutes the charge will
stop whether the battery is fully charged or not. Depending
on the battery type you are charging, you may have to
restart the charge to achieve a full charge of the battery.
YOU CAN STOP THE CHARGE PROCESS AT ANY TIME
BY PRESSING THE NIMH OR LIPO START KEY!
Team Orion Advantage ONE 405