Comet FDX HOT CUBE Mode D'emploi page 22

MOTORISATION
Fuel
Power
Engine
Starting
Nominal rotation speed - maximum
HYDRAULIC CIRCUIT
Maximum supply water temperature
Minimum supply water temperature
Minimum supply water flow rate
Maximum supply water pressure
Maximum priming depth
PERFORMANCE
Maximum flow rate
Nominal flow rate
Max pressure with water outlet temperature
up to 110 °C - 230 °F
Max pressure with water outlet temperature
up to 140 °C - 284 °F
Nominal pressure with water outlet temperature
up to 110 °C - 230 °F
Maximum reaction force on the spray gun
Sound pressure level - Uncertainty
Sound power level
Operator hand-arm vibration - Uncertainty
PUMP OIL
WEIGHT AND DIMENSIONS
Length x width x height
Weight
Engine fuel tank
Diesel tank
(1)
Measurements in agreement with EN 60335-2-79.
(2)
Also see the corresponding oils table.
CAUTION
• For the engine to reach its maximum power it needs at least 10 hours running-in at a load 15 to 20% lower than the machine' s maximum performance.
• The engine' s maximum power diminishes as the altitude and ambient temperature at which it is working increases (there is a drop of about: 3.5% every
305 m/1000 ft above sea level and 1% every 5.6°C/42°F above 16°C/61°F). If the high pressure water cleaner is used at a high altitude or with high ambient
temperature please refer to the engine' s operating and maintenance manual to see if any precautions need to be taken.
• The declared performance refers to an atmospheric pressure of 1013 hPa at sea level and an ambient temperature of 16°C/61°F.
• The specifications and technical data are approximate. The manufacturer reserves the right to make all changes to the machine it deems appropriate.
22
(kW - HP)
(RPM)
(°C - °F)
(°C - °F)
(l/min - USgpm)
(bar - psi)
(m - ft)
(l/min - USgpm)
(l/min - USgpm)
(bar - psi)
(bar - psi)
(bar - psi)
(N) 42
(dB(A))
(dB(A))
2
(m/s )
(mm - in)
(kg - lb)
(l - USgal)
(l - USgal)
FDX COMPACT CUBE
13/180D
DIESEL FUEL
4,5 - 5,5
Yanmar L70V
ELECTRICAL
3400 – 3600
60 - 140
5 - 41
16 - 4,2
8 - 116
1,0 - 3,3
13 -3,4
12,1 - 3,2
180 - 2611
32 - 464
170 - 2466
50
(1)
89 - 0,7
(1)
107
(1)
3,9 - 0,24
AGIP ROTRA MULTI THT
940x780x820 - 37,0x30,7x32,3
190 - 419
2,7 - 0,71
20 - 5,3
15/160D
18 - 4,8
15 - 3,9
14,2 - 3,7
160 - 2320
150 - 2175
42 50
(2)