Special Safety Instructions For This Device - Clatronic HAS 2712 Mode D'emploi

Masquer les pouces Voir aussi pour HAS 2712:

Mode d'emploi & garantie (37 pages)

Table Des Matières

Table des Matières

Les langues disponibles

Symbols in these Instructions for Use

Important information for your safety is specially marked. It is essential to comply with these

instructions in order to avoid accidents and prevent damage to the machine:

WARNING:

This warns you of dangers to your health and indicates possible injury risks.

CAUTION: This refers to possible hazards to the machine or other objects.



NOTE: This highlights tips and information.

Symbols on the Product

On the products you will fi nd symbols that indicate warnings or provide information:

WARNING:

•

The nozzles become hot during operation.

•

If the hair dryer is used in the bathroom, remove the mains plug after use as water

represents a hazard. This also applies when the hair dryer is switched off.

•

Please ensure that the inlet grille remains free of fl uff and hairs. Danger of fi re!

As additional protection we recommend the installation of a fault current protection device

(RCD) with a rated current of not more than 30 mA in the wiring system of the bathroom.

Please contact an authorised electrician for advice.

1. Fully unwind the mains cable.

2. Ensure that the round brush is fi xed fi rmly in place.

3. Insert the plug into a duly installed 230V/50Hz protective contact socket.

4. When your have dried your hair with a towel (no longer wringing wet), turn it evenly

around the round brush or shape your hair with the curler switched on as desired.

5. Setting the Temperature Level

Position 1:

Position 2:

-HAS 2712.indd 29