Quick Start - Samson Graphite 49 Mode D'emploi

Quick Start

1.
Connect the Graphite 49 to your computer using the supplied USB cable. The unit will
receive power and transmit MIDI data via the USB connection.
2.
Connect a ¼" TS pedal to the SUSTAIN pedal input.
Sustain Pedal
3. Push the POWER switch to the on position.
4.
Launch your DAW or virtual instrument software, and set the Graphite 49 as the MIDI Input
and MIDI Output device.
5.
To use the Graphite 49 with an external MIDI device (such as a sound module), connect a
5-pin MIDI cable to the MIDI OUT on the rear of the Graphite 49, and to the MIDI IN of the
external device. For more information on connecting to an external MIDI device, please see
the MIDI Out section on p. 26.
12
MIDI Device
Computer