Device Start-Up; Charging The Batteries; Using The Device - Clatronic AKS 827 Mode D'emploi

5....-05-AKS 827
Wall Installation
With the help of screws and dowel plugs (not supplied) the mounting can also be
attached to the wall.
To do so, please measure the distance between the indentations on the rear.
Beforehand you should ensure that you will not damage any pipe or electric wiring
hidden in the wall! Then drill holes at this distance.
Insert the AC adapter in a duly installed 230V/50Hz protective contact socket. The
charging LED lights up. Please insert the vacuum cleaner into the wall holder with
the handle facing downwards. The charging lasts approx. 16 hours. Once the char-
ging is over, unplug the AC adapter.
Unplug the device and fit on the desired nozzle. To start the vacuuming, press only
the On/Off switch. Once you have finished or when the batteries are down, connect
the vacuum to the charger as described in „Charging the Batteries". Make sure that
the plug is inserted.
Brush nozzle:
Crevice nozzle:
• Always unplug the device before cleaning!
• Clean the casing with a dry cloth.
• Since the device has a removable and washable filter, there is no need to buy
spare dust bags.
• Release the dust container with the release button (1). Empty the container.
• Remove the dust filter and beat it. After emptying the container several times, it
can also be cleaned in water. Dry well once you have finished.
• Fit in the dust container and lock it in place.
Battery Disposal
The device contains rechargeable nickel-cadmium batteries.
• Used batteries and accumulators (rechargeable batte-
ries) should not be disposed of in domestic waste.
• These can be returned to a collection point for old bat-
teries or special refuse. Contact your local authority for
further information.
30.07.2004 14:53 Uhr

Device start-up

Charging the Batteries

Using the Device

Nozzles
For the vacuuming of large surfaces.
Perfect for vacuuming the interior of cars.
Cleaning
Seite 29
NiCd:
29
GB