TC-21FL-ISO.book Seite 20 Mittwoch, 14. September 2011 9:43 09
Operation
7
Operation
NOTICE!
A
If you use the cooler in your car, you must secure the lid with the
velcro fasteners supplied (FK-ISO).
NOTE
I
Before you put the new refrigerator into operation, you should clean
it inside and outside with a damp cloth for hygienic reasons (see
also chapter "Cleaning and servicing" on page 23).
7.1
Tips to save energy
NOTE
I
A ventilator in the interior space of the cooling box provides for the
circulation of the cold air within the box. Thus a better cooling ca-
pacity will be achieved. In order that the cold air cannot reach the
outside when opening the cooling box, this is equipped with a
switch which turns off the ventilator as soon as the lid is opened.
Choose a well ventilated installation location which is protected against
direct sunlight.
Allow warm food to cool down first before placing it in the device to keep
cool.
Do not open the cooling device more often than necessary.
Do not leave the cooler unit open for longer than necessary.
If you want to set an increased energy efficiency and a limited cooling
capacity for the cooler unit, use the cooler's ECO mode.
7.2
Switch on the cooling box
NOTICE!
A
Take care that there are only objects or goods in the cooling box
which may be cooled or heated to the selected temperature.
➤ Place the cooler on a firm support or fasten it in the vehicle using the ISO-
FIX kit.
20
TC-21FL-ISO
EN