Receiving A Call; Making A Call - Parrot MINIKIT Smart Mode D'emploi

Synchronising the phonebook
With some Bluetooth phones, the phonebook is
automatically synchronized in the kit's memory.
Note: Only the contacts stored in the phone
memory are synchronized. If your contacts are
stored in the SIM card memory, transfer them into
the phone memory.
If your phone
synchronization, you can also send contacts manually
from your mobile to the car kit via Bluetooth. To do
so, select Receive
user guide for more information about sending
contacts (via Object Push).
Recording voice tags
All your contacts, after automatic synchronization or
Object Push process, are directly provided with a
voice tag in the Parrot MINIKIT Smart. Consequently,
you don't have to record your own voice tag on each
contact to make a call via the voice recognition
process.
However, if the Parrot MINIKIT Smart doesn't
understand the name of one of your contacts or if a
voice tag is too long, you can record a new one. To
do so, select Add voice tags
contact and record your voice.
doesn't support automatic
contacts. Refer to your phones'
and then select the
Phone

Receiving a call

An incoming call is indicated by a vocal message. The name
of the caller is announced if his number is recorded in the
phonebook of the phone connected to the Parrot MINIKIT
Smart.
If you want to answer the call, press the green button.
If you want to refuse the call, press the red button.

Making a call

To make a call via voice recognition:
1. To start the voice recognition feature, press the
green button.
> The Parrot MINIKIT Smart asks you the name
of the contact you want to call.
2. Say the name of the contact and the type of
number («Work», «Cellphone»...) if there are
several numbers associated to your contact.
> The call is automatically launched if the voice
tag is correctly understood.
> If it is not the case, a confirmation message is
asked by the kit. Confirm by saying «Yes» or
«Call».
English 11