Pacific Flex-Sens Manuel D'installation page 6

・Never fit a damaged transmitter to a wheel rim
・Do not fit the tire to the rim unless confident that the valve has been fitted correctly
・Never re-use an old valve core if it has been removed from the valve stem
・Always ensure these components below are replaced with new Flex-Sens parts.
Grommet: Even if there is no damage such as cracking or breaking, replace it with a new one when replacing the tire.
Valve cap: Be sure to attach it. Please use our genuine product for the valve cap. In particular, never use the metal cap.
Valve core: Use our genuine product (with Ni plating) for TPMS.
Puncture repair agent: Be sure to replace the transmitter when used
(1) Intrusion of foreign matter
・Please store the TPMS transmitter indoors. Do not expose it to rainwater or dust outdoors.
Ideally, store in dry air with humidity of 30% or less and temperature of 40°C or less.
・Be careful not to let foreign matter such as iron powder, organic solvents, oils, and chemicals adhere to the transmitter
even when stored indoors.
(2) Fall
・Be careful not to accidentally drop the TPMS transmitter during storage.
Please do not use if you accidentally dropped it when installing it
For vehicles sold in the U.S.A.
FCC ID: PAXPMVE002, PAXPMVE102
NOTE
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Notes on the product
TPMS transmitter storage
TPMS certification
6