Pacific Flex-Sens Manuel D'installation page 2

Installation and handling methods, procedures
Clamp-In Installation Warning!
1) Interference with rim (prior confirmation)
・The rim shape should conform to "Dimensions regarding TPMS rim mounting" (our technical data TPMS-0639).
・Check that the rim A, A'parts and nuts, washers, and nut tightening tools do not interfere.
・Check that the rim B part and the TPMS transmitter do not interfere.
(2) Suitable for mounting
・Please attach the TPMS transmitter in the direction shown below. Please do not turn it upside down and attach it.
(3) Forget washers
・Be sure to attach a washer when mounting the TPMS transmitter to the rim
2