Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME
V
Volts
A
Amperes
Hz
Hertz
W
Watts
min
Minutes
Alternating Current
Direct Current
No Load Speed
Class II Construction
/min
Per Minute
Wet Conditions Alert
Read The Operator's Manual
Eye and Head Protection
Safety Alert
Operate With Two Hands
Kickback
Bar Nose Contact
Wear Gloves
Wear Safety Footwear
Keep Bystanders Away
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc.,
per minute
Do not expose to rain or use in damp locations
To reduce the risk of injury user must read and
understand operator's manual before using this
product.
Wear eye and head protection when operating
this equipment.
Precautions that involve your safety.
Hold and operate the saw properly with both hands
DANGER! Beware of kickback.
Avoid bar nose contact.
Wear non-slip, heavy-duty protective gloves when
handling the chainsaw.
Wear non-slip safety footwear when using this
equipment.
Keep all bystanders at least 50 ft. away.
8
Publicité
Table des Matières
