Brandson Equipment 303124 Mode D'emploi page 21

4. Product details
1
No Description
1 Operating controls
2 Display
3 Heating elements
4 Pedestal
5. Initial use
Take the device out of the package and remove all the packaging material. Place
the fan heater on a level, flat surface so that the tilt protection at the bottom is not
actuated. Put the switch on the rear of the device in "OFF" (0) position and connect
the device to a 220-240V AC mains socket. You can then set the on/off switch to
"ON" position (1).
English
2
3
4
21