Connecting To A Tv And External Devices - Samsung HT-H6500WM Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connections

Connecting to a TV and External Devices

AUX IN
FM ANT
SPEAKERS OUT
POWER
LAN
FRONT
FRONT
L
R
L
SUBWOOFER
CENTER
R
OPTICAL
DIGITAL
AUDIO IN
HDMI OUT
HDMI IN
Red
R
White
W
Method 1
External Devices
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack
on your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with only
this cable connected. See page 17 in this manual and the section on ARC in your TV's user's manual for details.
Connecting to External Devices
Method 1 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on
the external analog component.  Select the AUX mode.
• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
Method 2 OPTICAL : Connecting an External Digital Audio Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes) to the home theater. Using a digital optical cable (not supplied), connect the Optical
Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital
optical cable.  Select the D. IN mode.
Method 3 HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack
on your digital device.  Select the HDMI mode.
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
Selecting an External Device to Use
To select an external device after you have connected it, press the
button, the mode changes in this order :
AUX IN
FM ANT
L
OPTICAL
R
DIGITAL
AUDIO IN
Method 2
Method 3
AUDIO OUT
OPTICAL OUT
BD/DVD
D. IN
12
- English
LAN
HDMI OUT
HDMI IN
HDMI OUT
SOURCE
button. Each time you press the
AUX
HDMI
FM
BT
HDMI IN

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Ht-h6530wm

Table des Matières