Resetting The System - Furygan HEAT URBAN 37.5 Notice D'utilisation

RESETTING THE SYSTEM

The system's initial settings can be
restored as follows:
- With the batteries connected to the
gloves, press the on/off buttons on
each glove and hold them down for
15 seconds. The red and green LED
light come on and the blue LED light
starts flashing.
- Keep holding the button until all
LEDS are turning off. Your gloves are
now resetted.
PLEASE NOTE after resetting the
system to the factory settings the
gloves will be updated to the lastest
software version at next connection
to the Fury Heat System App (see
page 24). This to make sure you
will continue enjoing all the lastest
features.
UPDATING
Your gloves' firmware may be updated
when opening the Furygan Heat Sys-
tem app (see page 24). These updates
are designed to improve the perfor-
mance of your product and can only
be accessed using the Furygan Heat
System app. Following connection, the
heating levels can be adjusted to the
user's satisfaction using the settings of
the Fury Heat System app, which can be
downloaded for free on Android or iOS.
FR
EN