Charging The Batteries; Heating Your Gloves - Furygan HEAT URBAN 37.5 Notice D'utilisation

18
CHARGING
THE BATTERIES
1. Connect the charger provided to a
100-240V socket.
2. Take one of the batteries and connect
it to the charger (jack socket). A red
LED light will come on.
3. Connect the other battery. It will take
around four hours for the batteries to
charge fully.
4.
The LED light will turn green when
the batteries are charged.
HEATING
YOUR GLOVES
1. Connect the jack socket extending
out of the glove's inner pouch to
the battery. A green LED light will
come on for around three seconds to
indicate that the battery is properly
connected.
2. Fit the battery into the pouch in the
cuff of the glove. Make sure that the
battery is correctly positioned to avoid
it being damaged when you are riding
your bike, and close the pouch.
3. To switch the system on, press
the red button on top of the glove
and hold it down for around three
seconds, until the green LED light and
three red LED lights (High heating
mode) come on.