INVENTOR C2-10L Manuel D'utilisateur page 12

2. Continuous draining
Water automatically can be emptied into a floor drain
by attaching the unit with a water hose.
• Remove the rubber plug located opposite the unit.
Insert the water hose into the drain outlet and make
sure all connections are firmly tightened in order to
avoid any possible leaks.
• The dehumidifier should be placed on a flat surface
in an upright position.
• Lead the water hose towards a suitable drainage
facility and be certain that the water flows naturally.
For correct drainage, make sure the hose stays below
the level of the drain hose outlet.
Caution: Water
hose should
never be bend
or twisted!
12
When the continuous drainage feature is not being used,
remove the drain hose from the drain hose
outlet and re- install the rubber plug.
x
water
drain hose outlet
EN