Operating Your Microwave Oven - INVENTOR MWO-23L-BD Manuel D'utilisateur

OPERATING YOUR MICROWAVE OVEN

This microwave oven incorporates modern electronic control
adjusting your cooking parameters, to achieve optimal cooking.
Note: When you plug in the microwave oven, the screen will
display "0:00" and the unit will beep once.
1. Clock Setting
• While unit is in standby, press the "Timer/Clock" button twice
to set the clock. The display will indicate "00:00" and the hour
figure will flash.
• Turn the knob selector " " to adjust the hour figure (00~23).
Press the "Timer/Clock" button to confirm Hours setting, the
minute figure will flash.
• Turn the knob selector " " to adjust the minute figure (00~59).
Press the "Timer/Clock" button to confirm Minutes setting.
• If "Stop/Clear" button is pressed, the unit will return to
previous state automatically.
2. Timer
• While unit is in standby, press the "Timer/Clock" button once
to set the Timer. The display will indicate "00:00".
• Turn the knob selector " " to adjust the Timer (0~95
minutes).
• Press the " Start/+30Sec./Confirm" button to start the Timer.
• When the timer reaches its set time, the microwave oven will
beep 5 times
Note: The display will continue to indicate the time, given the
digital clock has been set properly.
3. Microwave Cooking
• While unit is in standby, press the "Microwave/Grill/Combi"
button once to set the microwave cooking program. "P100"
will flash on the display.
15
ΕΝ