INVENTOR EP-MC78 Manuel D'utilisateur page 10

Filters Maintenance
The filters should always be kept clean, to achieve optimal
performance.
Clean the filters regularly. It is recommended to replace the
filters once a year.
Filters Cleaning
1. Open the lid of the dust tank.
2. Remove the sponge and pull the filter out of the dust tank.
3. Empty all accumulated waste, wash the sponge under running
water, and dry thoroughly.
Note: Do not use any cleaning detergents
4. Place the filter and sponge into the dust tank.
5. Close the lid and place the dust tank into the appliance.
• Be certain that the opening on the dust tank is aligned with
the air inlet.
10
ΕΝ
Note:
The filter protrusion should be aligned with the
relevant canal of the dust tank when placing into
position.