Spray Gun; Lance - Echo PWE-1800 Manuel De L'opérateur

SPRAY GUN

• To lock the trigger of the spray gun aim the gun away from you and push the
lock button from right to left, (Fig. 7), after doing so, squeeze or pull the trigger to
make sure it is locked and will not move. Always leave lock button in lock position
when not in use. This ensures the gun is in "safe" mode until it is ready for use.
Push to
lock

LANCE

• While the spray gun is in the locked position, insert the high/low nozzle lance
or turbo nozzle into the end of the spray gun by inserting and pushing together
turning clockwise simultaneously. To remove push together and turn counter
clockwise (Fig. 8).
Remember to always push the safety lock button to lock the trigger when changing
lances, to ensure that they do not accidentally eject with force during removal.
• When using the turbo lance, make sure the turbo nozzle is screwed on tight at
the end of the lance, each time you use it. The Turbo lance is designed for high
impact cleaning. Only use on hard surfaces such as driveways, cement surfaces,
patio bricks, etc.
Always test a small area to avoid chance of damaging the surface. (Fig. 9).
• Using High/Low Nozzle. High Pressure spray is used for cleaning and Low
Pressure spray activates the detergent function.
14
1
2
Trigger
Fig. 8
UNPACKING & ASSEMBLY
2
Trigger
Push to
unlock
1
Fig. 7
Fig. 9