Specifications - Opus Technologies OP-10SRX Manuel D'installation Et D'utilisation

OP-10SRX | Manuel d'installation et d'utilisation | Installation and user manual |
4. Specification
Frequency Preparation
Carrier Frequency Range
S/N Ratio
T.H.D
Display
Controls
Output Impedance
Squelch
Operation Voltage
Output Connector
Dimension (m/m)
Channel
Recommendation
1. In order to achieve the optimum reception condition and also extend the operating
distance, please leave on « open space » between the receiver and transmitter.
2. Keep the devices away from the metal objects or any interference sources, at least 50
cm.
3. To avoid the feed-back effect, don't leave the mic. to aim at the speakers directly.
4. For best pick-up pattern, please hold the middle of the mic. body.
PLL Synthesized Control
502~960MHz
> 105dB
<0,6% @1KHz
LED
-AF Level, channel
600 Ω
Pilot Tone & Noise Mute
12-18 VDC, 600 mA
1 XLR Balanced Socket
1 ᴓ6,3mm unbalanced phone jack
211mm (W)* 40 mm (H)* 125 mm (D)
16 selectable channels
17