Opus Technologies OP-10SRX Manuel D'installation Et D'utilisation page 16

OP-10SRX | Manuel d'installation et d'utilisation | Installation and user manual |
(5) Connecting the antenna
The user-friendly TG-10SRX antenna
comes with easy mount on socket for
effortless. Connect two antennas on the
back of the receiver and align them up-
ward.
(6) Turning the receiver on/off
Turn the receiver on by pressing the
« POWER »
(7) Adjusting the AF output level
Use the AF output level control located on
the front side of the receiver to adjust the
AF signel level that appaears at output.
(8) DR-900 dual pack adaptor
The dual rack adaptor is available to unify
the half rack space into a standard EIA size
(9) Basic operation
1. Turning the receiver on and off by pressing the POWER button.
2. Press the SET button for 3 seconds to select frequency and scan.
3. Press the SET button again to store once you make any changes.
4. Press the UP or DOWN button to adjust the setting of a menu.
16