- Put the battery in its compartment,
respecting the polarity (Fig.1).
- Replace the cover of the battery
compartment.
- It is essential that the batteries
should always be the same kind and
the same charge. Never mix alkaline
batteries with normal one (Carbon-
Zinc) and/or rechargeable ones.
- N.B. When changing the batteries,
the configuration of the appliance
will be removed, and you will need to
reset the parameters of the appliance.
Instructions for use
Before use:
- Prepare the appliance according to
the function you wish to use:
Weighing units selector Kg/Lb/St:lb
- The appliance has a selector of
weighing units, put the selector in the
position according to those units you
want to work with. (Fig. 2)
Use:
- Place yourself in the centre of the
platform avoiding abrupt movements,
maintaining immobile and without
touching other objects, until the
appliance shows your weight.
Automatic disconnection function
(stand-by):
- In order to save energy, the applian-
ce passes to stand-by after few
seconds if the user does not use it.
Manual Oslo.indb 11
Once you have finished using the
appliance:
- Remove the battery from the
appliance if you are not intending to
use the appliance during an extended
period.
Special messages:
The following messages can appear
on the screen:
- EEEE: means that the appliance's
capacity has been exceeded
- Lo: means that the battery has to be
changed/recharged
Cleaning
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as blea-
ch, or abrasive products, for cleaning
the appliance.
- Never submerge the appliance in
water or any other liquid or place it
under running water.
Supplies
- Only the following type of supplies
must be used with the appliance
(Fig. 3)
- Battery type: 3V CR2032
- These supplies are available in
specialist shops.
Anomalies and repair
- Take the appliance to an authorised
technical support service if a product
15/11/11 9:37