Blower/Sweeper Assembly; Assembling Blower - Remington RM170B Manuel Du Propriétaire

BLOWER/SWEEPER ASSEMBLY

ASSEMBLING BLOWER

WARNING
To Reduce The Risk of
Personal Injury or Electric
Shock –Remove battery from
power source before assem-
bling or changing attach-
ments.
ASSEMBLE BLOWER AS INDICATED
Follow the steps below to assemble the
blower.
1. Slide the blower tube onto outlet on front
of blower/sweeper housing (see Figure 4).
Make sure the tube release button engages
the tube.
FPO
Figure 4 - Sliding blower tube into place
8