Blower/Sweeper Maintenance; Cleaning And Maintenance; Replacement Parts - Remington RM170B Manuel Du Propriétaire

BLOWER/SWEEPER MAINTENANCE

CLEANING AND
MAINTENANCE
WARNING
Remove battery before clean-
ing or servicing. Severe injury
or death could occur from fi re,
electrical shock, or rotating
impeller.
WARNING
When cleaning blower/sweep-
er:
• Do not submerse in any
liquids
• Do not use products that
contain Ammonia, Chlorine,
or abrasives
• Do not use chlorinated
cleaning solvents, Carbon
Tetrachloride, Kerosene, or
Gasoline.
Use a soft cloth dampened with a mild soap and
water mixture to wipe blower housing. Do not
spray or pour water directly onto blower.
When not in use, store the blower indoors in
a dry location.
Figure 8 - Cleaning blower/sweeper hous-
ing
WARNING
Use of non-Remington parts
or accessories may cause
personal injury or damage to
the unit.

REPLACEMENT PARTS

725-05032
1. Battery
2. Battery Charger 725-05031
For original replacement parts and accessories,
call 1-866-206-2707 (in Canada, call
1-877-696-5533) or visit
www.remingtonpowertools.com.
10
BATTERY DISPOSAL AND
RECYCLING
This product uses nickel-cadnium bateries.
Local, state, or federal laws may prohibit
disposal of nickel-cadnium batteries in the
ordinary trash.
To help protect the environment and conserve
natural resources, please dispose of batteries
properly. You may contact your local recycling
center for information on where to drop off
the batteries.