Intended Use - Minebea Intec IE11357 Mode D'emploi

Intended Use

The IE11357 relay box is designed for
connecting peripheral devices with
higher output levels to a Minebea Intec
control device, such as the Combics 3
(e.g., with the "Filling with Extras" ap-
plication, Option H4).
Connect the IE11357 relay box to the
RS-485 interface using one of the fol-
lowing connecting cables:
– YCC02-RELAIS01 for connection to
Combics 3
– YCC02-RELAIS02 for connection to
Combics 3
Relay outputs
4 Relay Box IE11357
Peripheral device (e.g., filling system)
Relay card
Power supply
provided by
customer
(+10 V to
+30 V DC)
The relay outputs are wired directly to
the control elements (to be connected
by the customer).
The power supply to the IE11357 relay
box is to be provided by the custom-
er.
Inputs
Digital input/
output module
(NuDAM)
RS-485
Control device (Combics)