Manual
Before using the milk kettle for the
first time, rinse inside with hot water.
Then empty and let it dry.
Hold the lid with the integrated beater
Special notes and tips
Note: The appliance is
suited for heat up and
froth cold milk. It makes
milk foamy for use with
cappuccino, coffee latte.
Also hot chocolate can
be prepared from milk
and cocoa powder. You
can froth even cold milk without heating
up to enjoy it with iced coffee.
The appliance is not suited for mixing
other food as dough or milk shakes with
solid substance, like small parts of fruit
or ice cubes. This causes damage to the
beater shaft. It will bend and won't work
correctly anymore.
Tip: Use low-fat, fresh cold milk out of
the fridge with 1,5 % fat content. This
kind of milk is well-suited for consistent
Using the milk frother
Put the appliance onto a flat,
dry and stable working place.
Fill milk into the kettle before
plugging in.
CAUTION! When overfilling
the milk will overflow!
Please note: While frothing the
volume of the milk increases and
can overflow very easily.
Therefore do not fill more than to the
MAX mark, to avoid splashing.
Tip: If using milk with higher fat
content, fill not up to the MAX
mark, but a little below MAX.
Put the kettle onto the base station.
unit under running hot water,
to remove production residues.
Wipe the housing of the appliance
with a slightly damp cloth only and
dry with a soft cloth.
milk foam. Also low-fat UHT milk (made
to last) with 1,5 % fat content can be
used.
Note: Responsible for development of
milk foam is the protein inside. The fat
content is also an object.
Note: The volume of milk will increase.
Using a thermal method while frothing,
it is necessary to use cold milk from the
fridge. The temperature of the milk foam
should not be more than about 60°C .
If the milk foam gets too hot, the proteins
will clott, which has effect on the result.
Note: The milk kettle is non-stick coated
inside to make cleaning easier.
Therefore never use sharp edged
objects or abrasive materiel to clean the
non-stick coating, to avoid damage.
Please note: The appliance has
a security locker.
Close the lid firmly till it is engaged
fully (click sound). Otherwise the
appliance will not operate.
When plugged, the control lamp will
switch on and show red light.
Now you can start the appliance
by pressing the ON/OFF switch.
Select different function by pressing
one, two or three times:
1. Heat up and froth milk
2. Heat up milk
3. Froth cold milk without heating
11